Jungheinrich Etv 216 Error Codes [exclusive] May 2026

Jungheinrich ETV 216 reach trucks use a sophisticated self-diagnostic system to display Event Messages

First Character (F/E): Indicates the category of the message (e.g., "F" for truck error). jungheinrich etv 216 error codes

1. Measure resistance across the temperature sensor wires.
2. At room temperature (20°C / 68°F), resistance should be 2.5–3.5 kΩ. An open circuit indicates a failed sensor.
3. Replace motor or sensor (requires motor teardown).

Part 2: Categorized List of Common Jungheinrich ETV 216 Error Codes

We have organized the codes by system category. Note: Jungheinrich occasionally updates firmware, so some codes may vary slightly by production year (~2010–2018 for most ETV 216 models). Jungheinrich ETV 216 reach trucks use a sophisticated

1909.1: Drive pedal was pressed while the parking brake was still engaged. Measure resistance across the temperature sensor wires

Ensure you are not pressing the drive and brake pedals at once. 2951.1 Hydraulic function at startup Ensure all hydraulic controls are in neutral when starting. 5409.1 High battery temperature Allow the battery to cool before further operation. Troubleshooting General Issues

• Truth: It clears volatile memory but not EEPROM-stored faults. Only diagnostic software can clear permanent codes.

Error 0001 (or E0305.1): Low voltage during system start. Check the battery charge level, the Main Current Fuse, and the main contactor.