Zkteco Ua300 Factory Reset May 2026

You're looking for information on how to perform a factory reset on a ZKTeco UA300 device. Here's some general guidance:

Wait for Beep: Once the main screen appears, wait approximately 30–60 seconds until you hear a short beep. zkteco ua300 factory reset

2. Default Network Settings

• IP Address: 192.168.1.201
• Subnet Mask: 255.255.255.0
• Gateway: 192.168.1.1
• Port: 4370 (TCP/IP)
• Server IP: Blank (You must re-enter your PC’s IP)

6. Common Issues & Troubleshooting After Reset

| Symptom | Likely Cause | Fix | |-----------------------------|----------------------------------|---------------------------------------------| | Still asks for password | Reset incomplete / wrong jumper | Repeat hardware method, ensure short timing | | No network connection | Static IP reset | Reconfigure IP to match your LAN subnet | | USB not recognized | Driver not installed | Install ZK USB driver (Silicon Labs CP210x) | | Data lost | Expected | Re-enroll users and reconfigure rules | You're looking for information on how to perform