Siemens SIMATIC PC Adapter USB A2 (article number 6GK1571-0BA00-0AA0) is fully compatible with Windows XP SP2 and higher
Critical Warning: Never use a "generic USB to serial" driver. The A2 has a specific USB PID/VID (VID 10CF, PID 0x1402) that only Siemens' driver recognizes.
Where to find the XP driver
Siemens support website → Download section for PC Adapter USB A2
Filter by "Released for" → Windows XP (32-bit)
Look specifically for "PC_Adapter_USB_A2_Driver_V120.zip" or similar
5.1 Set the Interface in Set PG/PC Interface
Open Set PG/PC Interface (Start > Siemens Automation > STEP 7).
In the "Access Path" tab, select "PC Adapter (MPI)" or "PC Adapter (Profibus)" from the list.
Click Properties.
In the "USB" tab, ensure the correct adapter is selected (usually "USB-0: Siemens PC Adapter USB A2").
In the "MPI" tab, set the transmission rate:
Ensure that the adapter is properly connected to your computer and the PLC.
Check that the driver version is compatible with your Windows XP operating system.
Verify that the PLC's communication parameters are correctly configured in the adapter settings.
Use the Device Manager, right-click the adapter, select "Update Driver," and browse to this specific folder . Hardware Specifications Interfaces: Connects to USB 1.1, 2.0, or 3.0 ports .
Törlés megerősítése
Biztosan törölni szeretnéd?
Siemens Pc Adapter Usb A2 Driver Windows Xp -
Siemens SIMATIC PC Adapter USB A2 (article number 6GK1571-0BA00-0AA0) is fully compatible with Windows XP SP2 and higher
Critical Warning: Never use a "generic USB to serial" driver. The A2 has a specific USB PID/VID (VID 10CF, PID 0x1402) that only Siemens' driver recognizes. siemens pc adapter usb a2 driver windows xp
Where to find the XP driver
Siemens support website → Download section for PC Adapter USB A2
Filter by "Released for" → Windows XP (32-bit)
Look specifically for "PC_Adapter_USB_A2_Driver_V120.zip" or similar
5.1 Set the Interface in Set PG/PC Interface
Open Set PG/PC Interface (Start > Siemens Automation > STEP 7).
In the "Access Path" tab, select "PC Adapter (MPI)" or "PC Adapter (Profibus)" from the list.
Click Properties.
In the "USB" tab, ensure the correct adapter is selected (usually "USB-0: Siemens PC Adapter USB A2").
In the "MPI" tab, set the transmission rate:
Ensure that the adapter is properly connected to your computer and the PLC.
Check that the driver version is compatible with your Windows XP operating system.
Verify that the PLC's communication parameters are correctly configured in the adapter settings.
Use the Device Manager, right-click the adapter, select "Update Driver," and browse to this specific folder . Hardware Specifications Interfaces: Connects to USB 1.1, 2.0, or 3.0 ports . Siemens SIMATIC PC Adapter USB A2 (article number