Easy Jtag |link|: Samsung Kg Lock Remove

Removing the Samsung Knox Guard (KG) Lock Easy-JTAG Plus is a technical process that typically involves direct communication with the device's storage (eMMC or UFS) via ISP (In-System Programming) or by removing the chip. Pre-Requisites Easy-JTAG Plus Box with compatible sockets (UFS/eMMC) or ISP adapters. Easy-JTAG Plus software suite (Classic or Plus version). KG/MDM removal files Debug Files

Never skip this step. Before modifying anything, go to the "Read" tab and backup the following partitions: ROM1 (User Data) EFS (Contains your IMEI and network data) BOOT1 and BOOT2 4. The KG Lock Removal Process samsung kg lock remove easy jtag

Backup Data: Always perform a full DUMP (at least 4GB) of the existing firmware before proceeding. KG Removal Steps: Open the Easy-Jtag Plus software and detect the chip. Removing the Samsung Knox Guard (KG) Lock Easy-JTAG

Hardware Connection: Disassemble the device and connect the motherboard to the Easy-JTAG Plus Box using the ISP pinouts or by desoldering the chip into an EMMC/UFS socket. Step 5 — Reflash stock firmware (Odin) and reboot

Report: Samsung KG Lock Removal via Easy JTAG

Part 3: Prerequisites – What You Need for Easy JTAG Removal

To perform a Samsung KG lock remove easy JTAG procedure, you cannot do this with a USB cable alone. You need hardware.

For newer models (One UI 5+), you may need to clear a counter in the param partition as well.