Lighthouse-tx-htc-2-0-calibration-rescue-244.bin -

Lighthouse TX HTC 2.0 Calibration Rescue (file: lighthouse-tx-htc-2-0-calibration-rescue-244.bin)

A bricked transmitter sits on the bench like a storm-beaten beacon — silent, lights cold, its firmware gone dark. The filename lighthouse-tx-htc-2-0-calibration-rescue-244.bin suggests exactly the kind of lifeline technicians pray for: a compact, purpose-built rescue image intended to restore calibration data and coax stubborn RF hardware back into the world of measured, reliable signals.

Attempt official recovery first

Enter Recovery Mode: While the base station is unpowered, connect it to your PC via a micro-USB cable. Hold the Mode/Channel button on the back while plugging in the power lead. Release the button once your PC detects a drive named "CRP_DISABLED". Apply Rescue Firmware: lighthouse-tx-htc-2-0-calibration-rescue-244.bin

DFU or vendor tool: use vendor utility to read partition into host file. Or use JTAG/UART to read eMMC. Lighthouse TX HTC 2

  1. Place the rescued base station in mode “A” (channel 1) and another working base station in mode “B” (channel 2).
  2. Open SteamVR → Developer Settings → “Room Overview” → “Calibrate Base Station”.
  3. Follow the on‑screen pattern (usually covering the front with a cloth, then removing it).
  4. SteamVR will measure motor PPM (pulses per minute) and IR LED timings. This process can take 10–15 minutes.