Leica Tc 407 Driver ((install)) May 2026
A feature outline for a "LEICA TC 407 driver" could encompass a range of functionalities aimed at enhancing the interaction between a computer system and the LEICA TC 407, a total station used for surveying and construction. Here’s a potential feature list:
Q: Can I connect the TC 407 to a modern iPad or Android tablet? A: Yes, but you need a USB-to-serial adapter that supports OTG (On-The-Go) and an app like Serial USB Terminal (Android) or EFT Terminal (iOS). The driver is built into the adapter’s hardware chip. LEICA TC 407 driver
Project Management
: Surveyors often share stories of these units surviving falls onto concrete or being used in torrential rain and still working perfectly decades later. The Button Quirk A feature outline for a "LEICA TC 407
- Data transfer: Easily transfer data between the instrument and computer
- Instrument control: Configure settings, start/stop measurements, and control the instrument remotely
- Compatibility: Supports various software applications, such as Leica GeoMoS, Leica GeoTmo, and others
2. The USB-to-Serial Bridge Driver (Most Common Solution)
99% of users searching for the "LEICA TC 407 driver" actually need the driver for their USB-to-RS-232 converter cable. The two popular chipsets are: Data transfer : Easily transfer data between the
Phase 1: Hardware Preparation
- Power on your Leica TC 407. For data transfer, go to
Main Menu→Data Transfer→Define Format→ ChooseLeica GSIorASCII. (ASCII is easier for custom drivers). - Check the physical cable: You need a Leica GEV123 (9-pin female to 9-pin male) or a generic null modem cable. The TC 407 uses a null modem wiring, not a straight-through serial cable.
- Connect your USB-to-Serial adapter to the PC first, then connect the serial end to the TC 407.
Troubleshooting "Driver Not Found"
If your PC says "Driver error" or "USB device not recognized":