IR2110 High and Low Side Driver is a standard component typically included in the built-in Proteus 8 library

Schematic Setup:

  1. Place the IR2110 on the schematic.
  2. Connect VCC and VDD to +12V (logic supply).
  3. Connect COM to ground.
  4. Connect a bootstrap capacitor (10µF) between VB and VS.
  5. Connect a bootstrap diode from VCC to VB.
  6. Connect high-side MOSFET drain to +12V (or higher, up to 500V).
  7. Connect high-side MOSFET source to VS and to low-side MOSFET drain.
  8. Connect low-side MOSFET source to ground.
  9. Apply 5V square wave (20kHz, 50% duty) to HIN and complementary PWM (with dead-time) to LIN.

I understand you're looking for an IR2110 library for Proteus 8, specifically a download link.

  • IRS2110 (very similar, often available in newer Proteus versions)
  • IR2112 or IR2113 (check if available)
  • Use discrete MOSFET driver simulation with logic gates
  1. Navigate to your Proteus installation folder (usually C:\Program Files (x86)\Labcenter Electronics\Proteus 8 Professional\LIBRARY).
  2. Copy the IR2110.LIB file into this folder.
  3. If you have a symbol file (.LIB containing symbols), ensure it is placed in the LIBRARY folder as well.

Adding an IR2110 library to Proteus 8 is essential for any serious power electronics simulation. By manually adding the library files, you bridge the gap between simple schematic drawing and powerful circuit analysis.