Honor X9a Imei Repair Dft Pro Tool Exclusive !!hot!!

To repair the IMEI on an DFT Pro Tool , you will primarily work within the Qualcomm module, as this device uses a Snapdragon chipset. Prerequisites DFT Pro Tool:

  • Note: DFT Pro often automates the boot mode entry if the device is ADB enabled.
  1. Re‑flash stock firmware – Sometimes restores IMEI.
  2. Meta Mode tools – Like Maui META (requires auth bypass on newer MTK).
  3. Professional service – Local phone repair shop with licensed tools.
  4. Modem/NVRAM backup restore – If you have a backup from the same phone.

Step 8: Verify After reboot, dial *#06#. Both IMEIs should appear correctly. Check network by making a test call. honor x9a imei repair dft pro tool exclusive

Understanding the Scenario: Honor X9a IMEI Repair

The Honor X9a is a mid‑range Android smartphone. Like all modern phones, it has a unique IMEI (International Mobile Equipment Identity) number for each SIM slot. IMEI issues can arise after: To repair the IMEI on an DFT Pro

Manufacture Mode: Connecting the phone in a specialized mode to allow the tool to communicate with the DBAdapter port. Note: DFT Pro often automates the boot mode

Step 4: Write IMEI

  1. Click the IMEI Repair tab within the Qualcomm section.
  2. Select Dual SIM.
  3. Enter IMEI 1 (15 digits).
  4. Enter IMEI 2 (15 digits).
  5. Click Write IMEI to NVRAM.
  6. Wait for the log to show "Success".

Step 7: Execute the Repair Click Start Repair. The tool will:

Connect the device in Manufacturer Mode by dialing *#*#2846579#*#*, selecting Project Menu > Background Settings > USB Port Settings > Manufacture Mode. 2. Bootloader Image Selection

Scroll to Top