Gp Ethernet Printer Tool V5.0 Guide

GP Ethernet Printer Tool v5.0 (often referred to simply as GPEthernet ) is a configuration utility used primarily for

: Print a self-test page by holding the "Feed" button while turning the printer on to ensure the new IP is listed. Common Uses Static IP Assignment gp ethernet printer tool v5.0

Getting Started — Step-by-Step

1. Install the application and run it as Administrator.
2. Select network interface if multiple NICs are present.
3. Click “Scan” or “Discover” — the tool will list devices found with IP, MAC, model, and status.
4. Select a printer to view details: firmware version, serial number, current network config.
5. To set a static IP: choose “Static IP”, enter IP, subnet mask, gateway, and apply.
6. Test with “Print Test Page” or “Send Raw Data” to port 9100 or LPR queue name.
7. Save a device profile for reuse or export the inventory to CSV.

1. Open Windows Settings > Bluetooth & devices > Printers & scanners.
2. Click "Add device" . Wait for it to search, then select "The printer that I want isn't listed."
3. Select "Add a local printer or network printer with manual settings."
4. Choose "Use an existing port" and scroll down to find the port you just created (e.g., GP_Ethernet_192.168.1.120).
5. Driver Selection: