“fix firmware ml2165 ml2168 chip reset printer samsung 676 link”
Finalize: Wait 1–2 minutes for the printer to program and reboot. Once finished, you should cover or remove the toner chip with tape to allow the printer to read the toner as "100% full" indefinitely. Step 3: Manual Reset Alternatives
The information provided in this paper is for educational purposes only. The author and publisher disclaim any liability for damages or losses resulting from the use of this information. Always follow proper safety procedures when working with electrical devices.
Steps:
Factory Reset: Hold the Stop/Clear button for 15 seconds while the printer is on to clear simple error states.
Why Fix Firmware and Reset Chip?
Warning: A hard reset will erase all stored data, including pending print jobs. Proceed with caution.
- Purchase: Buy a replacement chip compatible with MLT-D101S (for ML-2165/2168). These are widely available on eBay or Amazon for a low cost.
- Locate: Open the printer lid and look at the side of the toner cartridge.
- Replace: There is a small slot on the side of the cartridge. Pry out the old chip (if present) and snap the new one in.
- Reset: Reinstall the cartridge. The printer will recognize the new chip and reset the counter to 100%.
If you recently replaced the toner or refilled it, the chip may be locked or incompatible with the installed firmware.