Epson Et 2400 Reset Install Better -

Here’s a step-by-step guide to reset the ink waste pad counter on an Epson EcoTank ET-2400 after replacing or cleaning the maintenance box (ink pad).

  • Fix: Perform the button-press reset (Part 2, Method 1) immediately after the first charge.

1. The Power Cycle (Soft Reset):Before diving into deep settings, try a power cycle. Turn the printer off, unplug it from the wall, and wait 60 seconds. This clears the temporary memory (RAM) and can often resolve simple communication errors without erasing your settings. epson et 2400 reset install

Procedure

  1. Enter Service Mode – With the printer off, hold the Stop/Reset + Power buttons simultaneously, release Power when the green light appears, then release Stop/Reset. Press Stop/Reset 6 times. The printer enters a special state where it accepts adjustment commands.
  2. Run the Reset Tool – Launch the Epson Adjustment Program (often obtained from third-party repair sites). Select “Waste Ink Pad Counter” or “Maintenance Box Counter.”
  3. Reset the Counter – Check the box for the pad and click “Initialization” or “Reset.” The tool will communicate with the printer via USB.
  4. Exit Service Mode – Turn the printer off and on normally.
Rolar para cima