235 Hot Install: Epson Adjustment Program Xp

Steps for Hot Install:

  1. : Resets the internal counter to 0% to clear service errors and resume printing. Printhead Maintenance

    Prerequisites

    Before beginning the "hot install," ensure you have the following: epson adjustment program xp 235 hot install

    Common Problems & Warnings

    “Communication Error”

    • This happens if you connected the USB before launching the program. Disconnect, close the program, and start over (the “hot” method).
    • Ensure you are in service mode – normal mode will not work.

    Step 1: Prepare the Printer

    • Ensure the XP-235 has paper loaded (some adjustment routines require a paper feed to complete).
    • Verify the waste ink pads are either replaced or manually cleaned and dried. If the pads are physically saturated, resetting the counter will lead to leakage.
    • Turn the printer OFF using the power button.
    • Disconnect the USB cable from your PC. (If using a hub, connect directly to the motherboard USB port.)
error: Content is protected !!