Dt6507 Led Mirror Clock Instructions < Legit >
Here are the operating instructions for the DT6507 LED Mirror Clock (commonly sold under brands like Allied or generic smart mirrors).
Setting the Minute
- The minute digits will flash. Use UP/DOWN to adjust from 00 to 59.
- Press SET to confirm and exit time setting (on some models, you must press SET multiple times to loop back to normal display).
Using the Snooze Function
Note on Power: Use the included USB cable for the best results, as some standard Type-C cables may not fit or power the clock correctly. INSTRUCTION MANUAL dt6507 led mirror clock instructions
- While "A1" is displayed, press and hold the SET button until the Hour digits flash.
- Use UP or DOWN to adjust the hour.
- Press SET again to move to the Minutes. Adjust with UP or DOWN.
- Press SET to confirm.
- Press and hold the "SET" button until the display starts flashing.
- Use the "+" and "-" buttons to adjust the hour and minute values. Press "SET" to confirm.
- Use the same process to set the date, including the year, month, and day.
- Once you have set the correct time and date, press "SET" to save the changes.
6. Using the Voice Control (Sound Activation)
The DT6507 features a sound sensor that wakes the display when it detects noise. Here are the operating instructions for the DT6507
Issue 3: The LED digits look “broken” (missing segments).
Solution: This is usually a loose ribbon cable inside. Gently press the back of the mirror near the display area. If that works temporarily, the mirror needs internal re-seating of the LCD/LED connector. The minute digits will flash
12/24 Hour Format: Use the UP or DOWN buttons to select either "12H" or "24H" format. Press MODE to confirm.