Precision and Alignment: A Guide to Assembling the DP Dual Trac 20
Before you open any boxes, read these safety rules. Incorrect assembly of a cable pulley system can lead to sudden cable failure or injury.
Pro Tip: Lay out all bolts and nuts by size before starting. This prevents using the wrong hardware in early steps. Step 1: The Main Frame and Base Start by assembling the "skeleton" of the machine. dp dual trac 20 assembly instructions full
She powered it on.
Crucial Step: Ensure there is a small amount of "free play" in these arms; over-tightening can cause friction and make the exercise feel jerky. 5. Finishing Touches Precision and Alignment: A Guide to Assembling the
: Features a 70kg (approx. 154 lbs) variable resistance stack. Dimensions
If your model has an electronic console, feed the tension cable and wire harness through the mast before bolting it down to avoid pinching the wires. Dual-Action Handlebars: Pro Tip: Lay out all bolts and nuts by size before starting
Visual check: Both cables should move freely without crossing. The pulleys must rotate in the same plane (no diagonal pull).