Cutting Plotter Kh-720 [top] -

The Go to product viewer dialog for this item. is a versatile 28-inch (720mm) vinyl cutting plotter designed for both professional and hobbyist use. It features a maximum paper feed width of 720mm and a maximum cutting width of 630mm, making it ideal for creating stickers, car decals, signage, and heat transfer designs for apparel. Key Technical Specifications

Benefits for you in using a laser instead of a cutting plotter - JustLaser cutting plotter kh-720

Report: Overview of the KH-720 Vinyl Cutting Plotter The KH-720 Vinyl Cutting Plotter Go to product viewer dialog for this item. The Go to product viewer dialog for this item

The Cutting Plotter KH-720 offers several benefits to users, including: Roll Loading: The machine uses a rear media

Roll Loading: The machine uses a rear media rack with two adjustable flanges. Maximum roll outer diameter (OD) is 150mm (6 inches). Without the rack, the KH-720 supports sheet feeding up to 1m length.

Tracking calibration: A known issue with this class is media drift over long cuts (>3 meters). The KH-720 addresses this with an automatic tracking compensation routine. After every 500mm of vertical feed, the controller checks the left pinch roller position via an optical encoder strip. If drift exceeds 0.3mm, it applies a micro-correction to the stepper motor on the next pass.

1. The Specs: What Does "720" Actually Mean?

The "720" in the model name refers to its maximum media width. It is designed to accept rolls of vinyl up to 72 centimeters wide. This is the "sweet spot" for most sign makers because standard vinyl rolls usually come in 24-inch (61cm) or 30-inch widths.

Critical limitation: The KH-720 is not a tangential cutter. It uses a drag knife. When cutting sharp corners (<45°), the blade must lift and rotate, leaving a slight overcut. For perfect corners, users must enable “corner optimization” in the driver, which over-cuts by 0.1mm.