Cat4500e-universalk9.spa.03.11.00.e.152-7.e.bin [top] <Premium>

The file "cat4500e-universalk9.spa.03.11.00.e.152-7.e.bin" is a Cisco IOS XE software image used for Catalyst 4500E Go to product viewer dialog for this item. and Go to product viewer dialog for this item.

  1. Download the software image: Download the software image from the Cisco website or a trusted source.
  2. Copy the image to the switch: Copy the software image to the switch using a method such as FTP, TFTP, or USB.
  3. Verify the image: Verify the integrity of the software image using a checksum or digital signature.
  4. Reload the switch: Reload the switch to load the new software image.
  5. Configure the switch: Configure the switch using the Cisco IOS command-line interface (CLI) or a network management system (NMS).

4. Hardware & Memory Prerequisites

Do not simply copy the file to flash; verify your hardware can run it. cat4500e-universalk9.spa.03.11.00.e.152-7.e.bin

Introduction

| | 15.2(7)E (this image) | IOS-XE 16.x/17.x | | :--- | :--- | :--- | | Programmability | NETCONF (limited) | RESTCONF, gNMI | | Container support | No | Yes (IOx) | | End-of-Support | 2025 (estimate) | Active | | Upgrade path | To 15.2(8)E | Hardware migration to 9300/9400 | The file "cat4500e-universalk9

03.11.00.e: Refers to the IOS XE version (3.11.0E), which is an extended maintenance release. Download the software image : Download the software