Bradex Bx60 Battery Charger Manual ((link)) Full May 2026
Bradex BX60 is a 4A 12V manual battery charger suitable for lead-acid batteries. It features a built-in ammeter to track charging progress and includes safety protections against short circuits and reverse polarity. Tayna Batteries Quick Setup & Operation Preparation : Ensure the charger is from the AC wall outlet before starting. Connection Attach the Red (+) clamp to the positive terminal of the battery. Attach the Black (-) clamp to the negative terminal of the battery.
- Charger Not Turning On: Check the power cord and ensure that it is properly connected.
- Charger Not Charging: Check the battery connections and ensure that they are secure.
- Overcharging: Check the charging mode and ensure that it is set correctly.
Preparation: Disconnect the battery from the vehicle if possible to protect sensitive electronics like the alternator. Connection: bradex bx60 battery charger manual full
Article last updated: [Current Date]
Compatible with: All Bradex BX60 models (v1.0–v2.3)
Disclaimer: This article is for informational purposes and mirrors the original Bradex user manual. Always verify with your specific product revision. Bradex BX60 is a 4A 12V manual battery
- Connect the charger to the mains power supply.
- Attach the battery clamps to the battery terminals (red to positive, black to negative).
- Select the desired charging mode (6V or 12V).
- The charger will automatically detect the battery type and begin charging.
